FLOATING SURFACE AERATORS / AGITATORS & CONTROL PANELS

FLOATING SURFACE AERATORS / AGITATORS & CONTROL PANELS

[Click On The Pictures Below]

Kasco® high oxygen surface pond and lake aerator/agitators are very similar to the Kasco® pond fountain aerators with one important exception. Kasco® high oxygen surface pond aerators, also referred to as pond agitators, DO NOT have a deflector plate or nozzles attached to the pump. This significantly increases the volume of water that passes through the propeller and thus increases oxygen levels more efficiently in these shallow ponds and lakes. Kasco® pond and lake aerators and agitators are proudly Made In The USA!

 

Select From Our Kasco® Single Phase & 3-Phase Pond Agitators & Aerators:[Click On Pictures Below]

Kasco® high oxygen surface pond aerators are available in configurations from 1/2hp to 7.5hp depending on your requirements. Most Kasco® high oxygen pond aerators are available in both 120v or 240v models so your sure to find what you need. Kasco® offers many of their high oxygen aerators in 3-phase for commercial use as well. 120v and 240v Control panels are an optional feature on all Kasco® high oxygen pond and lake aerators.

Not sure what size Kasco® pond aerator/agitator to purchase? When determining which Kasco® floating surface aerator or agitator to choose, we generally recommend 3/4 to 1hp per surface acre of water. This assumes your water is no deeper than approximately 5'. Water in ponds greater than 5' should consider using our airBOOST® diffused aeration as a primary aeration system with surface fountain aeration as an optional or additional means of aerating.

All Kasco® pond aerator / agitators come complete with foam filled float, pump, power-cord and the control panel and bottom screen are optional. The design of the Kasco® pond aerator / agitator makes installation extremely quick and easy. Simply put, Kasco® pond aerators are the most dependable cost effective pond aerators in the market today. Kasco Marine, Inc has done an outstanding job making pond aerator selection easy for our customers. Kasco Marine offers pond aerators ranging in size from 1/2 horsepower up to 5 horsepower. Most Kasco® pond aerators are available in either 120v or 240v depending on your requirements. The cord length selection with each Kasco® pond aerator ranges from 50’ to as long as 400’ in some models so reaching the middle of the pond is rarely an issue. Kasco® also can provide a protective "varmint cover" to the power cords if you need.

AerationSupply.com™ is located only a few miles from Kasco Marine Inc. We personally know the staff at Kasco Marine and often see the dedication and commitment that goes into every pond fountain and aerator that leaves their shipping dock. We regularly visit with the engineers at the outdoor Kasco Marine test pond. This allows us to be on the cutting edge with the latest innovations and developments at Kasco. AerationSupply.com™ has sold well over a thousand Kasco® pond aerators in the last 10-years making us one of Kasco Marine's largest floating pond aerator distributors! We have been a distributor of Kasco® while they have developed many new pond aerator models. During that time we have listened very carefully to what our customers have to say about Kasco® pond aerators.

Every Kasco pond fountain, pond aerator, water circulator and deicing pump offers these important standard features:

* Longer-life top and bottom ball bearings

* Environmentally friendly oil-filled motor with a hard-face internal mechanical seal and external lip seal for protection against leaks

* Flood oil lubricated for excellent heat dissipation

* Industrial Design

* Highly efficient, lower power consumption than competitive equipment

* Superior dependability in salt-water or other corrosive environments

* All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode

* Requires minimal maintenance. We recommend cleaning the stainless steel motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded

* ETL listed to stringent UL and CSA Safety Standards

* U.P.S. Shippable

* Made with pride in the U.S.A.

Aeration Supply, Inc Copyright© 2011