240v 5hp [5.1VFX] Kasco Single-Nozzle Floating Fountain With Control Panel ****From $4,765.00****

The Kasco® 5.1VFX 240v 5hp single nozzle floating pond fountain circulates an impressive 3,500gpm of water. You just will not find another fountain in this hp class with this kind of performance.

This unit comes standard with low amp draw pump, multi-piece thermoplastic float and C-85 240v control control panel which includes an auto-timer and photoelectric eye for the optional light kit [sold separate]. The C-85 240v control panel must be "hardwired" by a licensed electrician or other qualified individual. Once the control panel is wired, the pump and light kit power cords will then plug into the control panel.

There simply is not a better value available when purchasing a floating fountain.

Kasco® Standard Features Include:

* Longer-life top and bottom ball bearings

* Environmentally friendly oil-filled motor with a hard-face internal mechanical seal and external lip seal for protection against leaks

* Flood oil lubricated for excellent heat dissipation and longevity

* Industrial design for use in fresh water, salt water, brackish water and waste water

* Highly efficient, lower power consumption than competitive equipment

* All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode

* Requires minimal maintenance. We recommend cleaning the stainless steel motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded

* ETL listed to stringent UL and CSA Safety Standards

* Most units are U.P.S. Shippable

* Made with pride in the U.S.A.

Want To Learn More?

Designed to provide optimum performance and a stunning display for large ponds, Kasco’s 5.1VFX (Single phase) & 5.3VFX (3 phase) expands the proven VFX line into a 5 HP model. 5.1VFX at nightThe classic Kasco "V" fountain pattern, 9' tall x 34' wide gives this model a beautiful eye-catching display. The larger motor and enhanced propeller design gives a pumping rate of over 800 gallons per minute, adding maximum oxygen to improve your pond or lake aeration. It will assist in improving your water quality as well as adding to the aesthetic appeal of your pond. It is available in a 240V single phase or 208/240V 3 phase, 60Hz model.

The 5.1VFX is supplied with a state-of-the-art GFCB protected control panel, model C-95. The panel includes a 240 volt control panel with timer, GFCB protection, 120V GFI protected outlet for lights, and photocell for light operation. Kasco recommends a licensed electrician to install the C-95 control panel and wire the 5.1VFX into the panel.

The 5.3VFX, 3 phase unit is supplied with a simple to use, all inclusive GFI protected 3 phase control panel, model CF-3235. Without the confusing options, these panels include all the best features. Included in this UL-508A, non-metallic 4x/3r panel is a true, 3 phase rated personnel protection GFI with a 5ma trip level. Also included is a motor starter with adjustable overload, lightning/surge protection, two 24 Hour time clocks (one for the unit and one for lights), and a Hand-Off-Auto switch. Other features are an angled field wiring terminal block for easy installation, input terminals for field installed interlock, and startup instructions with wiring diagram in the door. A licensed electrician should install this control panel. The 5.1VFX & 5.3VFX boast an innovative float design with a low profile in the water for enhanced appearance, plus an attractive decorative shape.

Add an optional LR-375 Low Voltage Light Kit to the 5.1VFX or 5.3VFX to extend its beauty into the nighttime hours. Lighting enlivens the water display, turning water drops into glimmering jewels of light while creating a resort-like appearance to your overall water feature. Add two LR-375 Light Kits for a total of 6 lights and a stunningly bright display. Recommended when brighter lights are desired or in areas with high light pollution. The LR-375 Low Voltage Light Kit includes three machined-bronze light fixtures each with 75 watt MR-16 Halogen lamps. The lighting kit’s transformer is integrated into the system, so there’s no extra wiring required. Simply plug it into the C-95 Control Panel and the lights will operate whenever the unit operates during darkness. Three clear MR-16 lamps are included with each kit. As an option, you can choose any or all of the optional colors of Red, Green, Blue and Yellow.